Hi guys, it's me (again).
Again, I'm fighting the clock :mad: I can not synchronize with the signal AES.
It was like this:
192 (1) as the master clock - 8 channels adat ----> Mixer Ramsa DA-7
192 (2) as a slave clock - 8 channel TDIF ------> Mixer Ramsa DA-7
Two 192 interfaces are clocked via BNC
192 (1) clock output -------> 192 (2) clock input & 192 (2) clock output -------> 192 (1) clock input.
Everything worked perfectly!
When I decided add a third interface and get extra 8 AES channels to mixer, I could not do it :(
I clocked it like existing ones (loop clocking).
192 (1) clock output -------> 192 (2) clock input & 192 (2) clock output -------> 192 (3) clock input & 192 (3) clock output -------> 192 (1) clock input.
But no sound in mixer from AES channels. Adat & tdif sounds ok, adat and tdif slots marked "lock" in mixer's screen, but aes slot marked "unlock".
I think maybe my mixer need an extra BNC-sync especially for AES channels?
192 (1) clock output -------> 192 (2) clock input & 192 (2) clock output -------> Mixer clock input & Mixer clock output -------> 192 (1) clock input.
Now mixer is clocked through adat. If I plug it in to the clock loop BNC like interfaces? Now mixer synchronized through adat and sounds well.
Or plug mixer to x256 clock?
Again, I'm fighting the clock :mad: I can not synchronize with the signal AES.
It was like this:
192 (1) as the master clock - 8 channels adat ----> Mixer Ramsa DA-7
192 (2) as a slave clock - 8 channel TDIF ------> Mixer Ramsa DA-7
Two 192 interfaces are clocked via BNC
192 (1) clock output -------> 192 (2) clock input & 192 (2) clock output -------> 192 (1) clock input.
Everything worked perfectly!
When I decided add a third interface and get extra 8 AES channels to mixer, I could not do it :(
I clocked it like existing ones (loop clocking).
192 (1) clock output -------> 192 (2) clock input & 192 (2) clock output -------> 192 (3) clock input & 192 (3) clock output -------> 192 (1) clock input.
But no sound in mixer from AES channels. Adat & tdif sounds ok, adat and tdif slots marked "lock" in mixer's screen, but aes slot marked "unlock".
I think maybe my mixer need an extra BNC-sync especially for AES channels?
192 (1) clock output -------> 192 (2) clock input & 192 (2) clock output -------> Mixer clock input & Mixer clock output -------> 192 (1) clock input.
Now mixer is clocked through adat. If I plug it in to the clock loop BNC like interfaces? Now mixer synchronized through adat and sounds well.
Or plug mixer to x256 clock?
Aucun commentaire:
Enregistrer un commentaire