Hi,
Running PT 11.1.3 on Mavericks 10.9.3. I'm trying to get an album I made in 1997 into PT so I can remaster it. I have the AES/EBU output of the DAT (the mix down deck in 1997) going into my HD I/O. The level metering LED's of the HD I/O show the signal, at the levels expected. I've gone to the Hardware menu of the Setup menu and selected channels 1-2, then made channels 1-2 come from the AES/EBU encl input, which should be the built-in digital input.
I then go into the I/O menu of the setup menu, and moved channels 1-2 to digital in the input menu.
As I said, I have nicely bouncing LED's on the I/O, but I can get no signal into PT from the I/O.
It works fine when I switch inputs to one of my many analog sources, but if I go back to digital, the signal goes away.
MacPro 8 core, 16 GB ram, HDX system with 8x8x8 HD I/O. Any help you can give me will be appreciated. Thanks in advance.
Running PT 11.1.3 on Mavericks 10.9.3. I'm trying to get an album I made in 1997 into PT so I can remaster it. I have the AES/EBU output of the DAT (the mix down deck in 1997) going into my HD I/O. The level metering LED's of the HD I/O show the signal, at the levels expected. I've gone to the Hardware menu of the Setup menu and selected channels 1-2, then made channels 1-2 come from the AES/EBU encl input, which should be the built-in digital input.
I then go into the I/O menu of the setup menu, and moved channels 1-2 to digital in the input menu.
As I said, I have nicely bouncing LED's on the I/O, but I can get no signal into PT from the I/O.
It works fine when I switch inputs to one of my many analog sources, but if I go back to digital, the signal goes away.
MacPro 8 core, 16 GB ram, HDX system with 8x8x8 HD I/O. Any help you can give me will be appreciated. Thanks in advance.
Aucun commentaire:
Enregistrer un commentaire