Good day to you all on the DUC.
I have just introduced an Apogee Symphony 16x16 Analogue onto my PT11 HD Native system along side my HD 8x8x8. I have connected the symphony to the second HD Native card port. The symphony is set up in PT mode. I am running into an iMac 3.5GHz i7 with 32 gig of ram. I am using the 8x8x8 as the master clock and have connected a UAD 4-710D from one clock output and the Apogee connected from the second clock output from the 8x8x8. Both into the clock inputs of the 4-710 and the Apogee. The hardware is set up and recognised. I have 16 outputs from the Apogee going to an SSL X Desk and returning to the Apogee. I am getting signal out and returning and hearing sound.
However after a few seconds I am getting error message aee 9129 which is a either a clocking issue or increase HW buffer size. I have done this but to no avail. I clearly have a connection issue with the apogee and the way I have connected the clock? The apogee is also clicking and showing a warning sign every few seconds. I have both trawled the DUC and read the apogee manual but cannot find a solution so I am hoping someone hear can tell me what I have done wrong please? I hope I have provided enough information so far too.
Thank you in advance, Jon
I have just introduced an Apogee Symphony 16x16 Analogue onto my PT11 HD Native system along side my HD 8x8x8. I have connected the symphony to the second HD Native card port. The symphony is set up in PT mode. I am running into an iMac 3.5GHz i7 with 32 gig of ram. I am using the 8x8x8 as the master clock and have connected a UAD 4-710D from one clock output and the Apogee connected from the second clock output from the 8x8x8. Both into the clock inputs of the 4-710 and the Apogee. The hardware is set up and recognised. I have 16 outputs from the Apogee going to an SSL X Desk and returning to the Apogee. I am getting signal out and returning and hearing sound.
However after a few seconds I am getting error message aee 9129 which is a either a clocking issue or increase HW buffer size. I have done this but to no avail. I clearly have a connection issue with the apogee and the way I have connected the clock? The apogee is also clicking and showing a warning sign every few seconds. I have both trawled the DUC and read the apogee manual but cannot find a solution so I am hoping someone hear can tell me what I have done wrong please? I hope I have provided enough information so far too.
Thank you in advance, Jon
Clocking issues in PT 11 HD Native
Aucun commentaire:
Enregistrer un commentaire