I'm using an MBox Pro, a MacBook Pro '11 I believe with Protools 10. I have been using this setup recently and have had no problem. All Audio Tracks are output to a Stereo Aux Send(2Mix) with the 2 mix Aux Send Output to Output 1-2(Headphones). This Aux Send is also sending to Output 3-4(my cheap speakers) and Output 5-6(NS-10s) for monitoring level in the other room. Record Signal is coming to all speakers, and I can adjust the level of 3-4 and 5-6 with the busses, or turn down the knob on 3-4.
The issue i'm having is in the past I have been able to pull down the 3-4 Bus and hear the record level by itself or pull out the 2Mix and just hear the record level. Now when I pull down the 3-4 Bus everything is gone, no mic signal is making it through. The is especially bad when the person on the mic does not want to hear their voice while they record. When the Audio track is muted the record signal is still making it into PT, but I'm getting no signal at all for monitoring.
I'm assuming some setting has changed or there is a button I'm just missing. I defaulted all I/o inputs outputs and busses. The record signal never made it to 5-6 in the past, it just had the 2mix coming out. I was able to monitor on 3-4 and adjust the 2mix to the vocal for monitoring, by pulling the bus fader down. Now it all seems to be one. I thought it was just an advantage of 3-4 on the front of the interface. Sorry if this is getting jumbled. Basically why am I not hearing the Mic signal when I pull the 3-4 bus down to my monitoring speakers.
The issue i'm having is in the past I have been able to pull down the 3-4 Bus and hear the record level by itself or pull out the 2Mix and just hear the record level. Now when I pull down the 3-4 Bus everything is gone, no mic signal is making it through. The is especially bad when the person on the mic does not want to hear their voice while they record. When the Audio track is muted the record signal is still making it into PT, but I'm getting no signal at all for monitoring.
I'm assuming some setting has changed or there is a button I'm just missing. I defaulted all I/o inputs outputs and busses. The record signal never made it to 5-6 in the past, it just had the 2mix coming out. I was able to monitor on 3-4 and adjust the 2mix to the vocal for monitoring, by pulling the bus fader down. Now it all seems to be one. I thought it was just an advantage of 3-4 on the front of the interface. Sorry if this is getting jumbled. Basically why am I not hearing the Mic signal when I pull the 3-4 bus down to my monitoring speakers.
Aucun commentaire:
Enregistrer un commentaire